UNIONExplorer 2025 Fixações de Splitboard

Easy, fast handling, best board feeling for the downhill run

Only when your splitboard binding feels like a normal snowboard binding can you enjoy the descent to the fullest. The Union Explorer binding therefore focuses on natural board feeling, less moving parts and a robust design, made for the longest tours and steepest lines.

Split Pin System
The Union Split System is simple and very quick to use. To switch to ride mode, simply place the binding on the disc mounted to the board, slide the long pin under the baseplate and you're done. To switch to walk mode, pull the pin out again, place the binding on the touring brackets and push the pin back in.

Highback
The EXP2 Highback was developed specifically for splitboarding. It comes with a quick release for the tilt angle (Forward Lean). This allows you to switch from touring to ride mode with just one hand movement.

Baseplate
Mixed with carbon, Duraflex CB is lighter and much stiffer than typical fibreglass-reinforced nylon parts. The footbed has a special Non-Stick™ coating. This prevents ice from forming on the footbed and highback.

Straps
The ExoFrame 4.0 ankle straps are the ultimate connection between boot and binding. The progressive flex allows for quick response and power transfer for demanding riding at high speeds. The thermoplastic anti-slip material of the wide TS-2.0 toe straps keep your boots bombproof and secure in the binding. The Magnesium S1 buckles are made of magnesium and aluminium. A good combination of lightness and stability.

Included: All necessary mounting screws, Explorer Split Disk, Explorer Quiver Disk, Splitboard Strap, Touring Bracket